LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion 1 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Ignition Coil Housing Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the accelerator and cruise control cables from the bracket, if equipped.
  2. Remove the bracket.
  3. Remove the ignition control module (ICM). Refer to Ignition Control Module Replacement .
  4. Remove the ignition coil housing retaining bolts.
    5. Fig 1: View Of Ignition Coil & Module Assembly
    GM412144Courtesy of GENERAL MOTORS CORP.
  5. Remove the ignition coil housing from the camshaft cover.
scientia non olet · About LEMON Manuals