September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Disconnect the intake air temperature (IAT) sensor harness connector.
Courtesy of GENERAL MOTORS CORP.
- Loosen the air cleaner assembly fresh air duct to resonator clamp.
- Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
Courtesy of GENERAL MOTORS CORP.
- Loosen the resonator to throttle body clamp.
- Disconnect the air cleaner assembly fresh air duct from the resonator.
- Remove the air outlet resonator from the throttle body.