September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Disconnect the intake air temperature (IAT) sensor harness connector.
Courtesy of GENERAL MOTORS CORP.
- Loosen the air cleaner assembly clamp.
- Disconnect the air cleaner assembly clips.
- Remove the upper air cleaner cover.
Courtesy of GENERAL MOTORS CORP.
- Remove the air cleaner filter from the lower air cleaner housing.
- Inspect the air cleaner filter for dust, dirt, and water contamination.
- Replace as necessary. Refer to Maintenance Schedule
in Maintenance and Lubrication.