LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> VUE AWD L4-2.2L VIN D >> Repair and Diagnosis >> Maintenance >> Alignment >> Service and Repair >> Rear Wheel Alignment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Wheel Alignment

Rear Camber Adjustment





1. Loosen the upper control arm-to-frame fastener enough to allow movement.

Important: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
4. Reinspect the rear camber specifications and adjust as necessary.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Hold the nut and tighten the upper control arm-to-frame bolt.
^ Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Repeat the procedure for the other rear wheel.


Rear Toe Adjustment





1. Loosen the toe link-to-frame fastener enough to allow for movement.

Important: The frame of the vehicle is slotted, a cam nut is available for service if required.

2. Rotate the toe link cam nut in the direction necessary to correct the toe angle.
3. Snug the toe link-to-frame fastener, do not tighten at this time.
4. Reinspect the rear toe specifications and adjust as necessary.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Hold the nut and tighten the link-to-frame fastener bolt.
^ Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Repeat the procedure for the other rear wheel.
scientia non olet · About LEMON Manuals