October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
- Route the shift lock control solenoid wires through the opening in the control assembly.
Courtesy of GENERAL MOTORS CORP.
- Insert the wire terminals into the connector body.
Courtesy of GENERAL MOTORS CORP.
- Position the solenoid to the control assembly and install the solenoid pop rivet with a rivet gun.
Courtesy of GENERAL MOTORS CORP.
- Install the automatic transaxle control assembly. Refer to Shift Control Replacement
in Automatic Transaxle - 4T40-E/4T45-E.
- Enable the SIR system. Refer to SIR Disabling and Enabling Zones
in SIR.