Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Position the child tether anchor tab to the alignment hole in the rear shelf.
- Install the child tether anchor bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
- Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf (Late Production) in Interior Trim.
- Close the anchor bezel, pressing into place until fully seated.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.