October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
- Ensure the fuel pump is OFF.
- Place the bleed hose of the SA9127E
, or the J 34730-1A
into an approved fuel container.
- Open the bleed valve on the SA9127E
, or the J 34730-1A
in order to bleed the fuel system pressure.
Courtesy of GENERAL MOTORS CORP.
- Place a shop towel under the fuel pressure service connection to catch any remaining fuel spillage.
- Remove the SA9127E
, or the J 34730-1A
from the fuel pressure service connection.
- Drain any fuel remaining in the SA9127E
, or the J 34730-1A
into an approved fuel container.
- Inspect for leaks using the following procedure:
- Turn the ignition ON, with the engine OFF for 2 seconds.
- Turn the ignition OFF for 10 seconds.
- Turn the ignition ON, with the engine OFF for 2 seconds.
- Turn the ignition OFF.
- Inspect for leaks.
- Install the cap on the fuel pressure service connection.