Intake Manifold

L61 ENGINE TORQUE SPECIFICATIONS
Intake Manifold-to-Cylinder Head Bolts 10 Nm (89 inch lbs.)
Intake Manifold-to-Cylinder Head Nuts 10 Nm (89 inch lbs.)
Intake Manifold-to-Cylinder Head Studs 6 Nm (60 inch lbs.)
Throttle Body Bolts 10 Nm (89 inch lbs.)
Throttle Body Nuts 10 Nm (89 inch lbs.)
Throttle Body Studs-to-Cylinder Head 6 Nm (60 inch lbs.)
Throttle Cable Bracket Nuts 5 Nm (44 inch lbs.)
Throttle Position Sensor Screws 2 Nm (18 inch lbs.)

Tightening Sequence

Intake Manifold
- Install intake manifold.
- Install intake manifold bolts and nuts. Tighten by starting from center bolt and working outward.
Intake Manifold-to-Cylinder Head Bolts: 10 Nm (89 inch lbs.)
Intake Manifold-to-Cylinder Head Nuts: 10 Nm (89 inch lbs.)