LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> Ion 1 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Controls (Introduction)) >> Repair Instructions >> Barometric Pressure (BARO) Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the barometric pressure (BARO) sensor harness connector.
  2. Remove the BARO sensor bracket and bolt.
  3. Remove the BARO sensor (2).
    4. Fig 1: Locating SCIP Sensor & BARO Sensor
    GM1389393Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals