Diagnostic Aids
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- The Serial Data Link Tester J42236-A, is a special tool for the Corvette. This tool maintains a serial data connection with the power mode master (PMM) while isolating other modules from the class 2 serial data circuit. If available, use this tool in place of a jumper wire when isolating the cause of lost communications.
- The body control module (BCM) detects that the ignition is ON and sends the appropriate power mode message to the other modules. Therefore, the BCM must be connected to the DLC for any other module to communicate with the scan tool.
- When the class 2 serial data circuit:
- is shorted to ground
- is shorted to voltage
The following DTCs may set:
- U1300
- U1301
- U1305