LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SL1 Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle >> Removal And Installation General Service Information >> Control Lever Boot Assembly (On-Vehicle) >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Lever Boot Assembly (On-Vehicle): Removal

  1. Disable SIR system. For 2000 models, see DISABLING & ACTIVATING AIR BAG SYSTEM . For 2001 models, see DISABLING & ACTIVATING AIR BAG SYSTEM . For 2002 models, see DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove console. Refer to CONSOLE  .
  3. Unclip the boot assembly from the plastic retainer in the rear of the shifter control assembly by pulling rearward and upward on the boot.
    Fig 1: Removing Control Lever Boot Assembly
    G01033336Courtesy of GENERAL MOTORS CORP.
  4. Unclip the boot assembly from the plastic retainer in the front of the shifter control assembly and remove the boot.
scientia non olet · About LEMON Manuals