Cruise Control Disengage

Engaged cruise control will be disengaged if any of the following driver induced conditions exist:
^ Brake pedal is depressed
^ Cruise control switch is turned Off
^ Clutch pedal is depressed (M/T only)
^ Gear shift is manually placed in another gear that is not a cruise gear (P, R, N, 1st) (A/T only)
^ Vehicle speed falls below 40 km/h (25 mph) or exceeds 161 km/h (100 mph)
^ Vehicle decelerates faster than 6.5 km/h per second (4 mph/second) or accelerates faster than 16 km/h per second (10 mph per second)

Engaged cruise control can also disengage if the PCM detects any one of the following conditions:
^ Cruise clutch, direction or move circuit failure
^ Cruise switch circuit failure
^ Stop lamp switch circuit failure
^ Throttle position (TP) sensor circuit failure
^ Transaxle range switch circuit failure
^ Internal PCM hardware failure
^ Ignition voltage does not fall within 11-16 volts
^ Traction control active
^ Engine coolant temperature greater than 118°C (244°F)