LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC2 Automatic, MP7 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Induction System >> Removal & Installation >> Combination Valve >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Combination Valve: Installation

NOTE: Make sure gaskets are installed correctly or a leak will occur. If gaskets are removed from studs, replace with new gaskets.
  1. Install combination valve studs into rear air compressor bracket through air pipe flange holes.
  2. Install and torque nuts.

    Torque: 

    Air Pump Nut (At Combination Valve): 7 N.m (62 in-lbs) 

  3. Install air pump solenoid. Install and torque bolt.

    Torque: 

    Air Pump Solenoid Bolt: 3.4 N.m (30 in-lbs) 

  4. Install vacuum hoses. Install air hose.
scientia non olet · About LEMON Manuals