October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
"L" Series
- Remove and discard rear axle control arm bolts. Install NEW rear axle control arm bolts, but do not tighten at this time. Leave inside forward bolt out. Install Rear Alignment Tool (KM 900) into open bolt hole.
- Using alignment tool, move rear axle control arm in direction necessary for toe correction. Snug rear axle control arm bolts, but do not tighten to final torque at this time. Recheck toe and readjust as necessary. Tighten bolts to specifications. See TORQUE SPECIFICATIONS
. Repeat procedure for other rear wheel.