Engine Block Plug Installation

1. Apply gasket paste Loctite (R)) PST565 (or equivalent) to plug.
2. Install drain plug in water pump.
3. Install coolant jacket plugs.
- Torque: 35 Nm (26 ft. lbs.)
4. Apply gasket paste Loctite (R) PST565 (or equivalent) to rear oil passage plugs.
5. Install rear oil passage plugs.
- Torque: 60 Nm (44 ft. lbs.)
6. Apply gasket paste Loctite (R) PST565 (or equivalent) to oil passage plug.
7. Install oil passage plugs.
- Torque: 35 Nm (26 ft. lbs.)