LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> LS Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Low/Reverse Servo Assembly >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Low/Reverse Servo Assembly: Installation

CAUTION: Hand start and tighten servo cover bolts evenly to prevent damage to servo cover bore.
  1. Install servo return spring into transaxle case. Install servo cover and piston assembly over servo return spring. Hand start and install servo cover bolts. Tighten servo cover bolts to specification. See TORQUE SPECIFICATIONS .
  2. Lower vehicle. Remove clamp from A.I.R. hose behind cooling fan. Separate A.I.R. tube from hose and push tube back toward transaxle. See Figure. Note original position of A.I.R. components. Add DEXRON-III ATF to specified refill capacity. See FLUID CAPACITIES  under LUBRICATION.
  3. Start engine, warm up transaxle, and check for leaks. Check fluid level. See CHECKING FLUID LEVELS  under LUBRICATION.
scientia non olet · About LEMON Manuals