October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Converter Clutch Solenoid

Disconnect harness connector to Torque Converter Clutch (TCC) solenoid. Solenoid resistance should be 10-15 ohms. On all other models, measure resistance between appropriate TCC solenoid terminals. Solenoid resistance should be greater than 20 ohms.

NOTE: Some solenoids may have an internal pressure switch in series with the solenoid winding and will not show continuity until that pressure switch is applied by transmission hydraulic pressure.