Vehicle Set Up

Driver seated in vehicle, shoulder belts connected, both slider (mice) at "A" pillar, ignition key out of ignition, doors closed.

• Buckle driver's lap belt. Turn ignition to RUN position. Both belts should go to "B" pillar.
• Open driver's door. Driver's belt should go to "A" pillar.
• Close driver's door. Driver's belt should go to "B" pillar.
• Open passenger's door. Passenger's belt should go to "A" pillar.
• Close passenger's door. Passenger's belt should go to "B" pillar.
• Turn ignition Off. Do not remove key. Driver's belt stays at "B" pillar and passenger's belt stays at "B" pillar.
• Remove ignition key. Driver's belt goes to "A" pillar and passenger's belt stays at "B" pillar.
• Open and close driver's door. Driver's belt stays at "A" pillar and passenger's belt stays at "B" pillar.
• Open passenger's door. Passenger's belt should go to "A" pillar and driver's belt stays at "A" pillar.
• Close passenger's door. Both belts stay at "A" pillar

If system performance is not verified, continue to PASSIVE RESTRAINT DIAGNOSIS CHARTS.