LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1994 >> SC2 Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul - SATURN 5-Speed >> Component Disassembly & Reassembly >> Input Shaft Assembly >> Reassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Input Shaft Assembly: Reassembly

  1. Install 3rd gear bearing and 3rd gear. Install 3rd gear synchronizer ring on input shaft and synchronizer spring on 3rd gear synchronizer ring.
  2. Press 3-4 synchronizer hub onto shaft aligning tangs on synchronizer ring with slots in synchronizer hub. Install 3-4 synchronizer sleeve. Ensure alignment marks on side of synchronizer assembly are aligned during synchronizer sleeve installation.
  3. Heat 3-4 input gear bearing race and install. Install 4th gear bearing. Install synchronizer spring on 4th gear synchronizer ring and install unit on input shaft.
  4. Install 4th gear, hub side down and 4th input gear thrust washer. Press input shaft bearing on top of input shaft with snap ring groove down.
scientia non olet · About LEMON Manuals