LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1992 >> SL2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Theory and Operation >> Engine Controls - Theory & Operation >> Computerized Engine Controls >> Input Devices >> Coolant Temperature Sensor (CTS)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Coolant Temperature Sensor (CTS)

The CTS is a thermistor (temperature sensitive resistor) located in an engine coolant passage. The ECM supplies and monitors a 5-volt signal to CTS. This monitored 5-volt signal is then reduced by resistance of the CTS. When coolant temperatures are low, CTS resistance is high, and a high monitored voltage signal is seen by the ECM. When coolant temperatures are high, CTS resistance is low, and a low monitored voltage is seen by the ECM. When fully warmed, CTS should reflect a temperature of at least 185°F (85°C).

Coolant temperature input is used in the control of fuel delivery, ignition timing, idle speed, cooling fan operation, emission control devices and converter clutch application. A CTS which is out of calibration will not set a trouble code but will cause fuel delivery and driveability problems. A coolant sensor circuit problem (open or short to ground) will swing monitored voltage high or low and should set a related trouble code.