LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2011 >> 9-5 Turbo4, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Bus And Diagnostics Communication >> Adjustment Replacement >> Headlamp High Beam Control Module Programming and Setup >> Headlamp High Beam Control Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Headlamp High Beam Control Module Replacement

If the headlamp high beam control module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to SERVICE PROGRAMMING SYSTEM (SPS) .
  2. Perform the SPS function Headlamp High Beam Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration and Setup Function(s), select both control module Configuration/Reconfiguration and the appropriate control module Setup.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals