LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (General Electrical) >> Repair Instructions - Control Modules >> SPA control module (630), CV >> Refitting
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

SPA control module (630), CV: Refitting

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  1. Plug in the control module connector.
    Fig 1: Illustration For Steps 1-2
    G05571096Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Press the control module onto the main fuse box.
  3. Fit the side trim on the left-hand side of the luggage compartment.
  4. Carry out procedures after changing a control module. See Measures after changing the control module .
scientia non olet · About LEMON Manuals