LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (General Electrical) >> Repair Instructions - Control Modules >> Control module, STC (565) >> To fit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

To fit

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  1. Connect the control module connector.
    Fig 1: Illustration For Steps 1-2
    G05571074Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the control module.
  3. Connect the diagnostics tool and erase any diagnostic trouble code.
  4. Test the operation of the soft top.
  5. Fit Luggage compartment side trim.

    Carry out measures after replacing the control module. See Measures after changing the control module .

scientia non olet · About LEMON Manuals