LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2009 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Lighting And Signaling Systems >> Repair Instructions - Control Modules >> Load angle sensor, rear >> To fit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

To fit

  1. Plug in the connector.
    Fig 1: Illustration For Steps 1-3
    G05055411Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Refit console with sensor.

    Tightening torque up to and including M06 8 Nm (6 lbf ft) 

    Tightening torque from and including M07 10 Nm (7 lbf ft) 

  3. Refit upper ball section in link arm.
  4. Carry out AHL control module calibration .
scientia non olet · About LEMON Manuals