Installation Procedure

Fig 1: Removing/Installing Assist Step Nuts & Fasteners

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Position the assist step to the support brackets.
Install the nuts (1) that retain the assist step to the support brackets.

Tighten: Tighten the nuts to 25 N.m (18 lb ft).

Fig 2: Removing/Installing Assist Step Support Bracket

Courtesy of GENERAL MOTORS CORP.

Position the assist step assembly to the vehicle.
Install the bolts that retain the support brackets to the body.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).