To remove

WARNING: This page is about a different car, the 2005 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Carry out measures before dismantling the control module.

Move seat to its highest position.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
Disconnect the connector from the control module.

Fig 1: Disconnecting Connector From Control Module
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the upholstery from the seat front edge.

Fig 2: Removing Upholstery From Seat Front Edge
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the cable tie.

Fig 3: Removing Cable Tie
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Push the control module back so that it detaches.

Fig 4: Pushing Control Module
Courtesy of SAAB-SCANIA OF AMERICA, INC.