LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Fault diagnosis, general >> Testing for open/short circuits >> Testing For Short Circuits To Ground
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Testing For Short Circuits To Ground

Fig 1: Identifying Circuits Terminal Voltage
G03463046
Fig 2: Checking Battery Voltage
G03463047
  1. Make sure the lead being tested is not under tension (e.g. remove the relevant fuse) and that any loads are disconnected.
  2. Set the multimeter for measuring ohms.
  3. Connect one test lead to a good ground and the other to the point to be tested.
  4. Carefully jiggle the wiring harness and make sure the multimeter reading shows infinite resistance (OL) all the time.