LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Gear Selector Mechanism (Automatic) >> Adjustment-Replacement >> Ignition switch connector >> To remove
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

To remove

  1. Remove the selector lever housing, see SELECTOR LEVER HOUSING .
    IMPORTANT: When working on a dismantled selector lever housing, the selector lever should be protected with foam rubber or the like.
  2. Remove the ignition switch connector.
    3. Fig 1: Removing Ignition Switch Connector
    G03464137Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals