September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pump Relay
- Turn ignition off. Connect DVOM to relay terminal No. 87 and ground. See Figure
. Using a jumper wire, ground terminal No. 85. Replace relay if DVOM does not indicate battery voltage.
- Apply battery voltage between terminals No. 85 and 86. Inspect for continuity between relay terminals No. 30 and 87. Replace relay if continuity does not exist for each measurement.
- Inspect associated wiring for short or open circuits. See WIRING DIAGRAMS
article in this section. Repair wiring as necessary.