A/C Clutch Relay (9000 Series)
- Remove relay from relay panel. Relay panel is located behind glove box.
- Inspect for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Blue wire). Replace relay if continuity exists.
- Inspect for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if continuity exists.
- Connect 12 volts to relay terminal No. 86 (Green/White wire). Connect terminal No. 85 (Black wire) to ground. Relay should click.
- Inspect for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Blue wire). Replace relay if continuity does not exist.
- Inspect for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if continuity does not exist.