LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1993 >> 900 Commemorative >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Oxygen (O2) Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oxygen (O2) Sensor

  1. Turn ignition off. Disconnect 2-wire O2 sensor connector. Sensor is threaded into exhaust manifold. Measure resistance between 2 White wires. Resistance should be about 4 ohms.
  2. Connect DVOM leads between Black sensor wire and ground. Start engine. With sensor at operating temperature, voltage should fluctuate between 0.1 and 0.9 volt. Replace O2 sensor if resistance or voltage is not as specified.
scientia non olet · About LEMON Manuals