LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1991 >> 900 S, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

  1. Drain coolant and reinstall drain plug. Disconnect throttle cable and remove bracket from throttle housing. Unplug throttle position sensor connector. Disconnect automatic idle control valve hose from throttle body.
  2. Remove turbo delivery pipe (if equipped). Disconnect coolant and vacuum hoses from throttle body. Remove throttle body mounting bolts and throttle body. To install, reverse removal procedure. Tighten throttle body bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.
scientia non olet · About LEMON Manuals