Lighting and Horns: Specifications

WM 9423IN Bulb table and installation instructions

Bulb table





Installation instructions

Installation instructions for bulbs

WARNING

Risk of injury due to high voltage to built-in Bi-Xenon headlights.

-> Switch ignition off, remove ignition key and turn off light switch.

CAUTION

Danger of damage to property if bulbs are used or handled incorrectly!

- Risk of damage to bulbs and bulb housing.

-> Switch off ignition and remove ignition key.
-> To prevent short circuits, the load in question must be switched off while changing bulbs.
-> Only bulbs specified in the bulb table may be used.
-> Bulbs with a higher wattage may damage the bulb housing.
-> New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
-> In certain states, it is compulsory to carry spare light bulbs.