October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removing And Installing Sealing Ring For HALFSHAFT Flange: Installation
- Fill the space between the dust and sealing lips with grease (for example, Liqui-Moly).
- Drive sealing ring in until it is secure using pressure piece 9252.
- Always replace the snap ring for the halfshaft flange.
- To do this, clamp the flange in the vice with protective jaws and press out the snap ring with the new snap ring -A.-
- Grease the snap ring well and fit the halfshaft flange with the pull-in tool and extractor P 254 and pressure piece 9247/1.