LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Removing And Installing Drive Belt >> Removing Drive Belt
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removing Drive Belt

REMOVAL PROCEDURE FOR DRIVE BELT

No. Procedure Instructions
1 Remove left-hand seat Disconnect the electrical plug connection. Undo four Torx screws with socket TX 50 (3/8 inch).
2 Remove rear wall cover on passenger compartment rear wall Remove rear wall lining. Unscrew seven hexagon-head bolts and two hexagon nuts (a/f 10 mm) and remove cover.
3 Remove drive belt Mark belt travel direction with a colored pen. Slacken belt by turning the tensioning pulley (a/f 24 mm) clockwise, hold still and simultaneously take the belt off the drive pulleys. Visually inspect the condition of the belt and replace it if necessary.
scientia non olet · About LEMON Manuals