LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1999 >> Boxster Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Removing and installing rotor for hall sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removing and installing rotor for hall sensor: Removal

  1. Heat rotor area with a hot-air gun. Pull off rotor with a commercially available extractor. Place a spacer, for example VW 545/2, between the spindle and camshaft.
    Fig 1: Pulling Off Rotor With A Commercially Available Extractor
    G03139118Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals