Circuit Board - Modification of Replacement Unit

Group
9

Model
4 Cyl.

Part Identifier
9038

Number
9505

September 28, 1995

Subject:
Modify Replacement Circuit Board For Fuel Gauge Function

ATTENTION: Service Manager / Service Technician

Models Affected:
1985/2 944 and 1986 944 and 944 Turbo

Concern:
Modification to superseded brake pad sensor warning circuit board, part number 944 641 959 02.





Repairs:
When installing the small circuit board, part number 944 641 959 02, on the above-mentioned vehicles, it is necessary to solder a .5 mm jumper wire between the two terminals shown in figure 1. If the jumper is not installed, the fuel gauge will be inoperative.