LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1983 >> 928 Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustment >> Riding Height >> 928S (Front)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

928S (Front)

  1. Checking or adjusting riding height must only be performed with vehicle on level floor. Place wheels in straight ahead position.
  2. Measure distance from boss (on forward underside of lower control arm) to floor. Distance should be approximately 7.48" (190 mm). Height is determined by the coil springs and corrections can be made by placing spacers underneath lower spring retainers (a maximum of two spacers per spring) or the replacement of coil springs.
scientia non olet · About LEMON Manuals