Liftgate Angle Sensor Replacement

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Liftgate Angle Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement
1	Liftgate Angle Sensor Procedure Disconnect the electrical connector. Unsnap upper portion of sensor from liftgate and lift upward to release tab.

Callout

Component Name

Preliminary Procedure
Remove the liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement

Liftgate Angle Sensor

Procedure

Disconnect the electrical connector.
Unsnap upper portion of sensor from liftgate and lift upward to release tab.