Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Control Module

Courtesy of GENERAL MOTORS CORP.

Remove the transmission control module (TCM), if equipped, from the mounting bracket and position aside.

Fig 2: Disconnecting/Connecting Electrical Connector From Electronic Brake Control Module (EBCM)

Courtesy of GENERAL MOTORS CORP.

Turn the ignition switch to the OFF position.
Disconnect the electronic brake control module (EBCM) electrical connector.

Fig 3: Removing/Installing Brake Modulator Assembly To The Bracket

Courtesy of GENERAL MOTORS CORP.

Loosen the 2 insulator nuts on the brake pressure modulator valve (BPMV) assembly.
Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.

Fig 4: View Of BPMV Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the brake pressure modulator assembly bracket mounting bolts.
Remove the bracket from the vehicle.