LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Engine Control System & Fuel System - 6.6L LMM - Introduction) >> Repair Instructions >> Glow Plug Control Module Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Wiring Harness Electrical Connector
    GM1862080Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine cover. Refer to Engine Cover Replacement .
  3. Disconnect the engine wiring harness electrical connector (1) from the glow plug control module.
    4. Fig 2: Identifying Positive Battery Cable
    GM1862082Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the positive battery cable (1) from the glow plug control module.
  5. Fig 3: Identifying Glow Plug Control Module Bracket
    GM1862083Courtesy of GENERAL MOTORS CORP.

    Remove the glow plug control module bolts (1).
  6. Remove the glow plug control module (2).
  7. Remove the glow plug control module bracket bolts (3), if required.
  8. Remove the glow plug control module bracket (4), if required.
scientia non olet · About LEMON Manuals