Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Level Sensor Electrical Connector (1), Locking Tangs & Retaining Clip
Courtesy of GENERAL MOTORS CORP.

Remove the sending unit. Refer to Fuel Sender Assembly Replacement .
Disconnect the fuel level sensor electrical connector (1).
Remove the sensor retaining clip (3).
Squeeze the locking tangs (2) and remove the fuel level sensor.