Circuit/System Verification
- Ignition ON, command each window UP and DOWN using the window switches on the master control and each rear window switch. Each window should perform the UP and DOWN functions from each switch.
- If a front window does not perform the UP or DOWN function, refer to Front Window Malfunction .
- If either rear power windows do not perform the UP or DOWN function, refer to Rear Window Malfunction .
- Disable and enable the rear window door switches by pressing and depressing the lockout switch on the master window switch. The rear window switches should be enabled and disabled when changing between the commanded states.
- If both rear window switches continue to function while disabled, refer to Lockout Switch Malfunction .
- Command the express down function of the driver door window by pressing the left front window switch past the first detent and releasing. The driver window should perform the express down function.
- If the function does not perform as specified, replace the master window switch.