Ambient Light Sensor: Service and Repair

Sunload and Twilight Sentinel Sensor Replacement

Removal Procedure

1. Remove the defrost grille. Refer to Defroster Grille Replacement (Defroster Grille Replacement).




2. Detach the sunload sensor (2) electrical connector retaining pin (3).
3. Remove the sunload sensor electrical connector (3).

Installation Procedure




1. Install the sunload electrical connector (3).
2. Attach the sunload electrical connector retaining pin (1).
3. Install the defrost grille. Refer to Defroster Grille Replacement (Defroster Grille Replacement).
4. Test the sunload sensor for the correct operation.