LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Tire Pressure Monitoring System) >> Repair Instructions >> Low Tire Pressure Indicator Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tire Pressure Indicator Module
    GM2065657Courtesy of GENERAL MOTORS CORP.
  1. Install the tire pressure module (1). Secure with retaining screws.
  2. Connect the tire pressure module connector.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the driver side knee bolster and tighten to 10 N.m (89 lb in).
  4. Install the I/P undercover.
  5. Connect the hood release cable to the hood latch release handle.
scientia non olet · About LEMON Manuals