Radio Antenna Module Replacement (Sedan)

WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Antenna Module (Sedan)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Lower the rear of the headliner trim panel to access the antenna amplifiers. Refer to Headlining Trim Panel Replacement (Wagon) or Headlining Trim Panel Replacement (Sedan) .
1	Radio Antenna Module Bolt (Qty: 1) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
2	Radio Antenna Module Assembly Procedure Disconnect the electrical connections. Disconnect the antenna cables from the rear glass.

Callout

Component Name

Preliminary Procedure:
Lower the rear of the headliner trim panel to access the antenna amplifiers. Refer to Headlining Trim Panel Replacement (Wagon) or Headlining Trim Panel Replacement (Sedan) .

Radio Antenna Module Bolt (Qty: 1)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb in)

Radio Antenna Module Assembly

Procedure

Disconnect the electrical connections.
Disconnect the antenna cables from the rear glass.