LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Vibe Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - On Vehicle >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front tire and wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation .
  3. Remove the right front engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .
    4. Fig 1: Power Steering Pump Components
    GM820256Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt (2) from the power steering pump outlet pipe bracket.
  5. Place a drain pan under the vehicle in order to catch the draining fluid.
    6. NOTE: Refer to Power Steering Hose Disconnected Notice .
  6. Remove the outlet pipe fitting (1) from the pump.
  7. Remove the outlet union from the pump.
  8. Remove the gasket.
  9. Remove the flow control valve from the pump.
  10. Remove the spring from the pump.
  11. Inspect the spring. Replace the spring if necessary.
scientia non olet · About LEMON Manuals