LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear (FWD) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheel Cylinder Components
    GM829894Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.
  1. Disconnect the electrical connector (6) from the wheel speed sensor.
  2. Remove the rear axle hub and bearing assembly. Refer to Wheel Bearing/Hub Replacement - Rear (FWD) or Wheel Bearing/Hub Replacement - Rear (AWD) in Rear Suspension.
    3. Fig 2: Removing Wheel Speed Sensor From Axle Hub
    GM840299Courtesy of GENERAL MOTORS CORP.
  3. Remove the wheel speed sensor from the rear axle hub.
scientia non olet · About LEMON Manuals