System Description

The diagnostic strategy for the evaporative emission (EVAP) system uses a vacuum pump to test for system leaks, after the engine is OFF. A unique fuel tank, EVAP canister, and EVAP vacuum leak pump work together to provide enhanced system diagnosis. The vacuum leak pump, the fuel tank pressure (FTP) sensor and the EVAP canister vent valve are all integral parts of one assembly. The assembly is attached directly to the EVAP canister, located near the fuel tank.

After the vehicle has sat with the engine OFF for about 5 hours, a comprehensive diagnostic is enabled with no operator input necessary. The complete test can take up to 15 minutes to run, with leak detection comprising the largest portion of the test. For more detailed information on the EVAP system components and diagnostic strategy, refer to Evaporative Emission (EVAP) Control System Description .