LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension System) >> Repair Instructions >> Lower Ball Joint Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ball Joint & Control Arm
    GM933754Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The control arm must be clean and free of debris.
  1. Install the ball joint to the control arm as previously noted.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT:
    • Only use hardware provided with the new ball joint.
    • The bolts must be installed with the bolt head on top of the ball joint.
  2. Install the ball joint to control arm bolts.

    Tighten:  Tighten the bolts and nuts to 68 N.m (50 lb. ft.).

  3. Install the lower control arm. Refer to Lower Control Arm Replacement .
scientia non olet · About LEMON Manuals